Mg-Zn-Gd準晶增強AZ31鎂基復合材料的摩擦摩損性能
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-05-06
以Mg-Zn-Gd準晶中間合金為增強相，AZ31鎂合金為基體合金，采用多次循環塑性變形技術制備準晶增強鎂基復合材料，并在低載荷條件下對合金和復合材料進行耐磨性能研究。
Mg-Zn-Gd準晶增強AZ31鎂基復合材料的摩擦摩損性能Friction and wear properties of AZ31 based composites reinforced with Mg-Zn-Gd icosahedral quasicrystal以Mg-Zn-Gd準晶中間合金為增強相，AZ31鎂合金為基體合金，采用多次循環塑性變形技術制備準晶增強鎂基復合材料，并在低載荷條件下對合金和復合材料進行耐磨性能研究。結果表明:當變形次數為250次時，準晶中間合金含量為10%(質量分?jǐn)?shù))的復合材料中第二相分布最為均勻;AZ31鎂合金和復合材料的摩擦因數均隨載荷的增加而略有降低;高熱穩定性及高硬度準晶的加入有效提高復合材料的耐磨性能。
The Mg-Zn-Gd icosahedral quasicrystal master alloy particles was added into the AZ31 alloy by the repeated plastic working (RPW) process in order to produce AZ31 based composite reinforced by the icosahedral phase. The wear-resistance of the alloys and compositions under a lower load were investigated. The results show that the distribution of reinforcement in the composite with 10% (mass fraction) quasi-crystal master alloy is significantly uniform. The wear coefficient of the AZ31 alloy and composites decreases as the load increases. On the whole, the addition of high-stable and high-hard icosahedral quasicrystal leads to obvious improvement of wear-resistance property.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.