錸對定向柱晶高溫合金微觀組織的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-03-21
采用 SEM、EPMA 和 TEM 等手段對不含 Re(0Re)和含 2%Re(2Re)的定向柱晶高溫合金鑄態和熱處理態組織進行了系統的研究.
錸對定向柱晶高溫合金微觀組織的影響INFLUENCE OF Re ON THE MICROSTRUCTURES OF A?DIRECTIONALLY SOLIDIFIED Ni-BASED SUPERALLOY采用 SEM、EPMA 和 TEM 等手段對不含 Re(0Re)和含 2%Re(2Re)的定向柱晶高溫合金鑄態和熱處理態組織進行了系統的研究. 結果表明: Re 促進了鑄態共晶外圍和晶界上 μ 相的析出; 合金熱處理后, Re 明顯促進了 MC 碳化物周圍和晶界上相的析出, 0Re 合金 MC 碳化物周圍只有少量的 M6C 相析出, 晶界上有細小的 M23(C, B)6硼碳化物析出, 而 2Re 合金 MC 碳化物周圍和晶界上都有大量塊狀 μ 相析出, μ 相的析出促進了 γ′包層的形成. 0Re 合金中 B 元素明顯偏聚于晶界, 而 2Re 合金中 B 元素分布相對比較均勻. 并對熱處理過程中 μ 相的析出機制進行了深入分析.?
Up to now, considerable effort has been expended in attempts to investigate the influences of Re?on Ni-base single crystal superalloys. However, few study had elucidated the influences of rhenium on carbide,?
boride and grain boundary. Therefore, the influence of a 2%Re (mass fraction) addition on the as-cast and?heat-treated microstructures of a Ni-based directionally solidified superalloy was investigated by comparison with?Re-free alloy using SEM, EPMA and TEM. The results show that Re accelerates the precipitation of μ phase in?the periphery of eutectic and at grain boundary for as-cast microstructure. After heat treatment, Re also accelerates?the precipitation of phase in the vicinity of primary MC carbide and at grain boundary. For 0Re alloy, there are?small number of M6C carbide in the vicinity of primary MC carbide and M23(C, B)6 boro-carbide at grain?boundary. For 2Re alloy, a large amount of blocky μ phase enveloped by thick γ'-film is found in the vicinity of?primary MC carbide and at grain boundary. Enrichment of boron along the grain boundary is observed in 0Re?alloy. On the contrary, relatively uniform distribution of B is found in 2Re alloy. The precipitation mechanism of?μ phase during the process of heat treatment is also analyzed.?
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.