擠壓態AZ31鎂合金熱變形過程中的孿生和織構演變
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-03-04
采用100 kN servo-hydraulic MTS型試驗機對擠壓態AZ31鎂合金進行溫度為350 ℃、應變速率為0.3 s-1和不同應變量下的熱壓縮；利用X射線衍射(XRD)測量不同應變量下的織構，并利用取向分布函數計算其織構類型，分析織構轉變；通過電子背散射衍射技術(EBSD)分析孿生的形成情況。同時，計算不同滑移系和孿生的斯密特因子，分析不同滑移系和孿生開啟的先后次序。
擠壓態AZ31鎂合金熱變形過程中的孿生和織構演變Twinning and texture evolution in extruded AZ31 magnesium alloy during hot deformation采用100 kN servo-hydraulic MTS型試驗機對擠壓態AZ31鎂合金進行溫度為350 ℃、應變速率為0.3 s-1和不同應變量下的熱壓縮；利用X射線衍射(XRD)測量不同應變量下的織構，并利用取向分布函數計算其織構類型，分析織構轉變；通過電子背散射衍射技術(EBSD)分析孿生的形成情況。同時，計算不同滑移系和孿生的斯密特因子，分析不同滑移系和孿生開啟的先后次序。結果表明：變形初期，由于拉伸孿生的出現導致 (0001) 和(0001) 織構的形成，并隨應變量的增加，發生動態再結晶， [0001]和 [0001]纖維織構完全由(0001) 和(0001) 織構代替；在變形初期，大部分晶粒先產生拉伸孿生，接著發生二階錐面滑移。
The hot compression test was performed on 100 kN servo-hydraulic MTS test machine at temperature of 350 ℃ and strain rate of 0.3 s-1?under different strains. X-ray diffraction (XRD) was used to measure texture. Then, the texture type under different conditions was also calculated using orientation diffraction function under different conditions, aiming to study the texture transformation. The electron back-scattering diffraction (EBSD) was used to analyze twinning. Schmid factor for different slip systems and twinning were calculated to determine the order of initiation of deformation modes. The results indicate that the extension twinning is observed at the early deformation stage, mainly contributing to the formation of (0001) and (0001) texture. [0001] and [0001] fiber texture are finally replaced by (0001) and (0001) texture as the initiation of dynamic recrystallization. At the beginning of deformation, substantial grains firstly occur extension twinning，followed by 2nd-order pyramidal slip.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.