Al-Mg-Sc-Zr合金冷軋板材的超塑性變形行為
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-03-04
在溫度450~520 ℃和1.67×10-3~1.00×10-1 s-1初始應變速率條件下對Al-Mg-Sc-Zr合金冷軋板材進行拉伸實驗，研究該合金的超塑性流變行為，探討其超塑性變形機理。
Al-Mg-Sc-Zr合金冷軋板材的超塑性變形行為Superplastic deformation behavior of cold-rolled Al-Mg-Sc-Zr alloy sheet在溫度450~520 ℃和1.67×10-3~1.00×10-1?s-1初始應變速率條件下對Al-Mg-Sc-Zr合金冷軋板材進行拉伸實驗，研究該合金的超塑性流變行為，探討其超塑性變形機理。結果表明：隨著變形溫度的升高，伸長率先增加后減小，在500 ℃和初始應變速率6.67×10-3?s-1條件下獲得的最大伸長率為740%。合金的應變速率敏感因子為0.40，激活能為101 kJ/mol；在超塑性變形過程中，合金組織發生明顯的動態再結晶，使原始纖維狀晶粒等軸化；Al3(Sc,Zr)粒子可有效釘扎晶界，抑制晶粒長大；超塑性變形過程的主要變形機制為晶界滑移，協調機制為晶界擴散控制的位錯蠕變。
The tensile tests for cold-rolled Al-Mg-Sc-Zr alloy were conducted at temperature of 450-500 ℃ and initial strain rate of 1.67×10-3-1.00×10-1?s-1. The flow behavior and deformation mechanism were investigated. The results show that the elongation changes as a parabola with the deformation temperature increasing, and the maximum elongation of 740% is achieved at 500 ℃ and 6.67×10-3?s-1. The strain rate sensitivity is 0.40, and the activation energy is 101 kJ/mol. The obvious dynamic recrystallization (DRX) is observed, which can transfer the grain from original fibrous structure to equiaxed microstructure. The Al3(Sc,Zr) particles pin effectively at grain boundaries to resist grain growth. The grain boundary sliding is the dominant deformation mechanism during the superplastic deformation, the dislocation creep controlled by grain boundary diffusion is the main accommodation mechanism.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.