固溶處理對7B04鋁合金組織及性能的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-03-04
利用金相組織觀察(OM)、掃描電鏡分析(SEM)、透射電鏡觀察(TEM)以及硬度測試，研究固溶處理對7B04鋁合金顯微組織及硬度的影響。
固溶處理對7B04鋁合金組織及性能的影響Effects of solution treatment on microstructures and properties of 7B04 aluminum alloy利用金相組織觀察(OM)、掃描電鏡分析(SEM)、透射電鏡觀察(TEM)以及硬度測試，研究固溶處理對7B04鋁合金顯微組織及硬度的影響。結果表明：實驗合金中的η相(MgZn2)為易溶相，S相(Al2CuMg)為難溶相，含F(xiàn)e雜質相為不溶相；進行單級固溶處理時，隨著固溶溫度的升高，實驗合金的固溶程度、再結晶程度和再結晶晶粒尺寸增加，當溫度超過480℃時，出現過燒現象，力學性能惡化，7B04鋁合金淬火敏感性較高；雙級固溶可有效抑制合金再結晶、降低合金淬火敏感性，實驗條件下較好的雙級固溶工藝為(450℃, 0.5h)+(490℃, 0.5h)，抑制合金再結晶效果最佳，經120℃時效24h后，硬度達到最大值，為204HV1。
The influence of solution treatments on the microstructure and hardness of 7B04 aluminum alloy were investigated by means of optical microscopy(OM), scanning election microscopy(SEM), transmission election microscopy(TEM) and hardness test. The results show that there are the soluble phaseη(Mg(Zn,Al,Cu)2), the poorly soluble phaseS(Al2CuMg) and the insoluble impurity Fe phase (Al7Cu2Fe). The degree of solid solution and recrystallization increases with the solution temperature increasing gradually. When the temperature exceeds 480℃, overburning on 7B04 alloy occurs and the properties was weakened, 7B04 alloy has high quench sensitivity. However, double-stage solution can inhibit recrystallization of the alloy and decrease the quench sensitivity effectively. The excellent strengthening effect can be expected at (450℃, 0.5h)+(490℃, 0.5h) among the experiments, by which the recrystallization of the alloy can be restrained mostly and the hardness can reach to 204HV1 after aging at 120℃ for 24h.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.