溫變形對汽車車身用6061鋁合金自然時效及力學性能的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-29
以汽車車身用6061-T4鋁合金為研究對象，利用顯微硬度測試、拉伸試驗和透射電子顯微鏡(TEM)，研究溫變形對汽車車身用6061鋁合金自然時效及烤漆硬化的影響。
溫變形對汽車車身用6061鋁合金自然時效及力學性能的影響Effect of warm deformation on natural ageing andmechanical property of aluminum alloy6061 sheets for automotive body?以汽車車身用6061-T4鋁合金為研究對象，利用顯微硬度測試、拉伸試驗和透射電子顯微鏡(TEM)，研究溫變形對汽車車身用6061鋁合金自然時效及烤漆硬化的影響。結果表明：溫變形后的6061鋁合金不會發生明顯的自然時效效應，放置8 d的自然時效過程中硬度值保持穩定；對溫變形樣品分別立即和停放8 d后，實施模擬烤漆(180 ℃人工時效30 min)溫變形后立即進行烤漆，其硬化能力與放置8 d后再進行烤漆樣品的無明顯差異。合金烤漆后的硬度與溫變形溫度有關，在160~230 ℃范圍內，隨著溫變形溫度上升，硬度上升；而經250 ℃拉伸后，烤漆硬度出現下降， 230 ℃為最適宜溫度，此條件下成形后的6061鋁合金經烤漆過程后，硬度最高值可達到114HV。
The effects of warm deformation on natural ageing and mechanical property of aluminum alloy 6061 for automotive body were investigated by microhardness test, tensile test and TEM. The results show that no obvious natural aging effect is found in the warm deformed samples, and the hardness maintains stable during the 8 d natural ageing after warm deformation. Simulated baking process, i.e., artificial ageing at 180 ℃ for 30 min, is conducted to the warm deformed samples immediately and after a delay of 8 d, respectively, and no obvious mechanical property difference is found between the two groups of samples. The hardness of the samples is deformation temperature dependent, i.e., it increases with the increasing of warm deformation temperature within the range of 160-230 ℃, but further increasing of deformation temperature to 250 ℃ leads to the decrease of final hardness. 230 ℃ is the optimum warm deformation temperature, and the final hardness of the samples deformed at this temperature increases to 114HV.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.