BT16鈦合金沉頭螺栓的加工工藝
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-27
研究MJ5和MJ6 兩種規格的BT16鈦合金沉頭螺栓顯微組織、流線和顯微硬度，并與直徑為6 mm的該合金絲材的顯微硬度和組織進行對比。
BT16鈦合金沉頭螺栓的加工工藝Process of BT16 titanium alloy fastener研究MJ5和MJ6 兩種規格的BT16鈦合金沉頭螺栓顯微組織、流線和顯微硬度，并與直徑為6 mm的該合金絲材的顯微硬度和組織進行對比。研究結果表明：BT16鈦合金螺栓光桿部位顯微硬度與直徑為6 mm的絲材退火狀態下的硬度相當；螺桿部位經受冷擠壓縮徑和螺紋滾制雙重冷變形強化，顯微硬度明顯高于光桿部位的顯微硬度；螺栓顯微組織與絲材退火狀態下的顯微組織一致，進一步證實螺栓是在退火狀態下直接使用的，未經過熱處理強化，BT16鈦合金沉頭螺栓采用一次縮徑的冷變形強化制造工藝。
The microstructure, streamline and microhardness of two different sizes BT16 countersunk head bolts were analyzed, and compared with that of thread of BT16 titanium alloy with diameter of 6 mm. The results show that the micro hardness of shank is similar to that of as-annealing thread with diameter of 6 mm. The micro hardness of screw is obviously higher than that of the shank because of cold deforming strengthen. Microstructure of BT16 bolt is very similar to that of thread in annealing state, which shows that the bolt can be used in annealing state without solution treatment and aging. Streamline and hardness analyses results show that BT16 countersunk head bolts are deformed under cold condition.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.