Ti-55鈦合金板材的超塑性變形行為
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-26
研究Ti-55鈦合金板材在890~910 ℃、初始變形速率為4.4×10?4~1.76×10?3 s?1條件下的超塑性變形行為。
Ti-55鈦合金板材的超塑性變形行為Superplastic deformation of Ti-55 alloy sheet研究Ti-55鈦合金板材在890~910 ℃、初始變形速率為4.4×10?4~1.76×10?3?s?1條件下的超塑性變形行為。結果表明：在900 ℃、初始應變速率為8.8×10?4?s?1變形條件下平均晶粒尺寸在4 μm左右細小等軸晶的Ti-55鈦合金板材的伸長率可達1 300%，表現出良好的超塑性；在一定成形溫度下其超塑伸長率隨應變速率的增大呈先增加后降低的趨勢，存在最佳應變速率8.8×10?4?s?1，高于或低于8.8×10?4?s?1，板材的超塑變形能力均有明顯降低；在高應變速率下，Ti-55板材的最大伸長率向高溫區移動；超塑性變形過程中晶粒呈相互聚合長大的現象，應變誘發組織粗化是超塑變形過程中組織粗化的主要因素。
The superplastic tensile tests were performed at various temperatures (890?910 ℃) and initial strain rates (4.4×10?4--?1.76×10?3?s?1). The results show that the fine-grained Ti-55 sheet, with an average grain size about 4 μm, exhibits excellent superplasticity. On the optimal superplastic condition of 900 ℃ and initial strain rate 8.8×10?4?s?1, a maximum elongation of 1 300% can be achieved. There exists an optimal strain rate of 8.8×10?4?s?1for each test temperature to get the highest strain, and the superplastic elongation would be significantly reduced at strain rates higher or lower than the optimum strain rate. The temperature for the best superplasticity of Ti-55 sheet moves to higher temperatures at high strain rates. The influence of the deformation on microstructure is obviously. The strain induce grain growth is one of the most prominent characteristic during superplastic deformation.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.