Ti5Mo5V2Cr3Al合金熱變形行為
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-25
采用Gleeble?1500熱模擬試驗機對TB10合金進行高溫壓縮變形實驗，分析該合金在變形溫度為700~1 050 ℃，應變速率為0.1~50 s?1條件下的變形行為及流變應力的變化規律。
Ti5Mo5V2Cr3Al合金熱變形行為Hot deformation behavior of Ti5Mo5V2Cr3Al alloy采用Gleeble?1500熱模擬試驗機對TB10合金進行高溫壓縮變形實驗，分析該合金在變形溫度為700~1 050 ℃，應變速率為0.1~50 s?1條件下的變形行為及流變應力的變化規律。結果表明，流變應力受變形溫度和應變速率顯著影響，流變應力隨變形溫度的升高和應變速率的降低而降低。采用雙曲正弦模型確定該合金的變形激活能Q和應力指數n，建立了相應的熱變形本構關系。
The hot compression deformation behavior of TB10 alloy was investigated by Gleeble?1500 simulator at the? strain rate range from 0.1 to 50 s?1?and the temperature range from 700 to 1 050 ℃. The laws of microstructure evolvement and the characteristic of flow stress were analyzed. The results indicate that the flow stress decreases with increasing temperature and decreasing strain rate. The constitutive relationship of TB10 alloy is obtained on the base of Arrhenius equations.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.