熱處理制度對TC18A鈦合金絲材組織和性能的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-19
采用不同的熱處理制度研究了退火和固溶時效溫度對TC18改進型合金TC18A d16.5 mm絲材組織和性能的影響。結果表明：在720~780 ℃，隨著絲材退火溫度的升高，強度降低，塑性變化不大；但當溫度超過780 ℃時，退火溫度對絲材拉伸性能影響不明顯；當時效溫度一定時，隨著固溶溫度的升高，絲材強度增加，塑性降低；固溶溫度不變時，強度隨時效溫度的升高而降低，塑性增加。
熱處理制度對TC18A鈦合金絲材組織和性能的影響Influence of heat treatment process on microstructure and?mechanical property of TC18A alloy wire采用不同的熱處理制度研究了退火和固溶時效溫度對TC18改進型合金TC18A d16.5 mm絲材組織和性能的影響。結果表明：在720~780 ℃，隨著絲材退火溫度的升高，強度降低，塑性變化不大；但當溫度超過780 ℃時，退火溫度對絲材拉伸性能影響不明顯；當時效溫度一定時，隨著固溶溫度的升高，絲材強度增加，塑性降低；固溶溫度不變時，強度隨時效溫度的升高而降低，塑性增加。
The influence of annealing and solution+aging temperatures on microstructure and mechanical property was studied. The results show that between 720 ℃ and 780 ℃, with increase in annealing temperature, strength of wire decreases, while plasticity has no obvious change. But above 780 ℃, the influence of annealing temperature on tensile property is not obvious. When aging temperature keeps constant, strength increases and plasticity decreases with increase in solution temperature. When solution temperature keeps constant, strength decreases and plasticity increases with increase in aging temperature.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.