固溶處理對近β鍛TC21合金組織的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-18
通過對TC21合金進行近β鍛，獲得典型的雙態組織。通過X射線衍射(XRD)、光學顯微鏡(OM)和掃描電鏡(SEM)分析了固溶處理對雙態TC21合金組織的影響。
固溶處理對近β鍛TC21合金組織的影響Effect of solution treatment on?morphology of near β forged TC21 alloy通過對TC21合金進行近β鍛，獲得典型的雙態組織。通過X射線衍射(XRD)、光學顯微鏡(OM)和掃描電鏡(SEM)分析了固溶處理對雙態TC21合金組織的影響。XRD分析表明：隨著固溶溫度的降低，TC21合金固溶水冷處理后的亞穩定相組成依次為α″(≥Tβ)、α+α″(Tβ≈935 ℃)、α+α″+β(915、855 ℃)、α+β(≤835 ℃)。分別對TC21合金進行895 ℃, 2 h，AC、QFC(慢爐冷)、FC+(610 ℃, 4 h，AC)熱處理，研究固溶冷卻速率對合金組織性能的影響。結果表明：隨著冷卻速率的增加，等軸α相基本保持不變，次生α相含量減少，合金強度增加，塑性減小。此外，分別對TC21合金在915、905、895、870和835 ℃進行2 h, AC固溶處理，金相分析表明：隨著固溶溫度的降低，等軸α相相含量及尺寸基本保持不變，次生α條所占比例增加，α條變寬。
Two-state microstructure of TC21 alloy was obtained by near β forging process. The effect of different solution treatments on the microstructure of TC21 alloy was analyzed by X-ray diffractometry (XRD), optical microscopy (OM) and electron microscopy (SEM). The XRD analysis reveals that with the decrease of solution treatment temperature, the phase compositions of TC21 alloy are α″ (≥Tβ), α+α″(Tβ≈935 ℃), α+α″+β (915, 855 ℃), α+β (≤835 ℃). The morphology and mechanical properties of TC21 alloy solution treated at 895 ℃ for 2 h with different solution cooling rate (air cooling, quick furnace cooling, furnace cooling) and then aged by 610 ℃, 4 h, AC was analyzed. As a result, with the increase of solution cooling rate, there is no obvious change on the primary equiaxed α phase, the content of secondary α phase decreases, the strength of the alloy increases, and the plasticity decreases at the same time. TC21 alloy was solution treated at 915, 905, 895, 870 and 835 ℃ for 2 h followed by air cooling, respectively. With the decrease of solution treatment temperature, the width and content of lamellar α phase increase, and there is no difference between the equiaxed α phase of TC21 alloy solution treated at different temperatures.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.