新聞資訊
熱循環溫度對Ti-6Al-4V合金組織和力學性能的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-07
采用500~1 000 ℃熱循環20次，研究Ti-6Al-4V(TC4)合金性能及微觀組織的變化。
熱循環溫度對Ti-6Al-4V合金組織和力學性能的影響Effect of thermal cycling temperature on microstructures?and mechanical properties of Ti-6Al-4V alloy
采用500~1 000 ℃熱循環20次，研究Ti-6Al-4V(TC4)合金性能及微觀組織的變化。結果表明：隨熱循環溫度的升高，TC4合金強度先降低后升高；低于800 ℃時，TC4合金塑性隨熱循環溫度升高變化不大，高于800 ℃，隨熱循環溫度升高，TC4合金塑性快速降低；隨溫度升高，TC4合金的晶粒明顯長大，溫度高于800 ℃時，TC4合金中開始形成片層狀組織，至1 000 ℃時，合金組織幾乎呈全片層狀。
The changes of microstructures and mechanical properties of Ti-6Al-4V alloy after thermal cycling 20 times from 500 ℃ to 1 000 ℃ were researched. The results show that the strength of Ti-6Al-4V alloy firstly reduces and then increases with the increase of cycling temperature. If the cycling temperature is lower than 800 ℃, its plasticity changes less with the temperature. While the temperature is higher than 800 ℃, its plasticity decreases fast. The grain size grows fast with increasing temperature. While the temperature is over 800 ℃, the lamellar microstructure forms, when the temperature reaches 1 000 ℃, the microstructure is almost lamellar one.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信和領英與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin?and?LinkedIn.