新聞資訊
第二、三代鎳基單晶高溫合金含Hf過渡液相(TLP)連接
發布人：上海艾荔艾金屬材料有限公司www.jshcn.cn
更新時間：2016-01-05
采用無 B 的含 Hf 鎳基合金作為中間層合金, 分別對含 Re 的第二代鎳基單晶高溫合金 (CMSX-4, 鑄態) 和第三代鎳基單晶高溫合金 (SXG3, 完全熱處理態) 進行 TLP 連接, 并分析了連接區的顯微組織演變以及降熔元素分布, 測試了連接區的顯微硬度.
第二、三代鎳基單晶高溫合金含Hf過渡液相(TLP)連接TRANSIENT LIQUID PHASE BONDING OF SECOND AND THIRD?GERNERATION Ni-BASED SINGLE CRYSTAL SUPERALLOY WITH?Hf-CONTAINING INTERLATYER ALLOY
采用無 B 的含 Hf 鎳基合金作為中間層合金, 分別對含 Re 的第二代鎳基單晶高溫合金 (CMSX-4, 鑄態) 和第三代鎳基單晶高溫合金?(SXG3, 完全熱處理態) 進行 TLP 連接, 并分析了連接區的顯微組織演變以及降熔元素分布, 測試了連接區的顯微硬度. 結果表明, 在 1290 ℃真空保溫 24 h 后, CMSX-4 和 SXG3 合金的 TLP 連接均已完成, 2 種合金的 TLP 連接過程也均符合經典模型. 以含 Hf 的鎳基合金作為中間層合金時, 在連接區內沒有出現擴散影響區. CMSX-4 合金的固溶處理可在 TLP 連接過程中同步完成, 縮短了熱處理工藝. SXG3 合金中的 C 與 Hf 結合在液相中形成固相 HfC, 降低熔體中 Hf 濃度, 縮短了等溫凝固階段的時間. 研究表明, 通過 TLP 連接可以研究小角度晶界的界面穩定性, 其中在 1150 ℃保溫熱處理后, SXG3 合金小角度晶界出現不連續脫溶轉變的臨界區間在 10°~17°之間.?
A Hf-containning Ni-based alloy was used as the interlayer alloy of TLP bonding for the 2nd?(CMSX-4, as-cast condition) and 3rd (SXG3, standard heat treatment condition) generation Ni-based single?crystal superalloys containing Re in this work, and the microstructure, composition and micro-hardness of?bonding zone were characterized. The results show that the TLP bonding of CMSX-4 and SXG3 alloy were?completed after bonded at 1290 ℃ in vacuum for 24 h. These TLP bonding process of CMSX-4 and SXG3?alloys can be explained well using classical TLP model. The diffusion affected zone was not observed during the?TLP bonding process. In addition, the heat treatment process of CMSX-4 is shortened by 24 h resulted from the?solid solution heat treatment of CMSX-4 alloy has been completed after the process of TLP bonding. The?isothermal solidification stage of SXG3 alloy was also accelerated due to the precipitation of HfC at the bonding?temperature, resulting in the reduced Hf concentration of Hf in the melting zone. Our study also indicates that the?interfacial stability of low angle grain boundaries can be investigated by the TLP bonding. The critical?misorientation value for discontinuous precipitation of SXG3 alloy along low angle grain boundaries was in?between 10o and 17o after heat treatment at 1150 ℃.?
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信和領英與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin?and?LinkedIn.