中斷時效處理對AA2024鋁合金力學性能和顯微結構的影響
發布人：上海艾荔艾金屬材料有限公司www.jshcn.cn
更新時間：2015-12-31
采用熱電力(TEP)、掃描電鏡(SEM)和透射電鏡(TEM)等顯微表征技術，結合硬度和韌性測試，研究中斷時效工藝(IA)對S相為主要強化相的AA2024鋁合金的力學性能和顯微結構的影響。合金經180℃欠時效處理后，分別在室溫和65℃進行低溫時效處理即中斷時效(T6I4)，然后在180℃進行再時效處理(T6I6)。
中斷時效處理對AA2024鋁合金力學性能和顯微結構的影響Effect of interrupted ageing on mechanical property and microstructure of AA2024 alloy采用熱電力(TEP)、掃描電鏡(SEM)和透射電鏡(TEM)等顯微表征技術，結合硬度和韌性測試，研究中斷時效工藝(IA)對S相為主要強化相的AA2024鋁合金的力學性能和顯微結構的影響。合金經180℃欠時效處理后，分別在室溫和65℃進行低溫時效處理即中斷時效(T6I4)，然后在180℃進行再時效處理(T6I6)。結果表明：相比T6工藝，T6I4工藝處理的合金可以獲得較好的韌性，但硬度略有降低；而T6I6工藝會同時降低合金的韌性和硬度。低溫中斷時效處理時，欠時效過程形成的S相基本不發生變化，合金內部形成的原子團簇可能是T6I4狀態韌性提高的原因。T6I6再時效過程中沒有形成更多的S相，且原有的S相明顯粗化，T6I6峰值時效狀態下，合金力學性能變差；AA2024合金中斷時效過程中沒有析出能夠形成S相的形核點。
The effect of interrupted ageing(IA) on the mechanical property and microstructure of AA2024 alloy, in which the S phase serves as the main strengthening phase, was investigated by the thermal electrical power (TEP),scanning electron microscopy (SEM), transmission electron microscopy(TEM) and hardness and toughness tests. The interrupted ageing at room temperature or 65℃was implemented on samples under-aged at 180℃ for T6I4 treatment, then re-ageing at 180℃ for T6I6 treatment. The results show that the T6I4 treatment can render better toughness and slightly lower the hardness of AA2024 alloy compared with T6 temper, presumably because of atomic clusters form during IA. Unfortunately, both hardness and toughness are worse after T6I6 treatments, under which, no precipitation of additional S phase but coarsening ones can be observed. It is thus reasonable to conclude that the low-temperature IA is not favorable to produce more Sphase nucleus which can grow further during re-ageing.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信和領英與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin?and?LinkedIn.