新聞資訊
2124鋁合金蠕變時效的微結構與性能
發布人：上海艾荔艾金屬材料有限公司www.jshcn.cn
更新時間：2015-12-26
研究蠕變時效前預處理（15%預變形+100 ℃預時效5 h）對可熱處理強化2124鋁合金蠕變時效成形的影響。采用SEM分析、TEM分析以及測定電導率、維氏硬度和拉伸性能等手段，分析兩種不同初始狀態試樣經過蠕變時效后的微結構和性能。
2124鋁合金蠕變時效的微結構與性能Microstructure and properties of creep aged 2124 aluminum alloy
研究蠕變時效前預處理（15%預變形+100 ℃預時效5 h）對可熱處理強化2124鋁合金蠕變時效成形的影響。采用SEM分析、TEM分析以及測定電導率、維氏硬度和拉伸性能等手段，分析兩種不同初始狀態試樣經過蠕變時效后的微結構和性能。結果表明：初始預處理降低了蠕變時效過程中蠕變初始階段的蠕變伸長率，但增大了穩態蠕變階段的蠕變速率；初始預處理對基體中粗大Fe、Si相有一定的破碎作用，蠕變時效過程中，粗大粒子在蠕變應力作用下進一步被破碎；預處理能夠改善第二相的析出形態和分布，使析出相分布均勻；預處理試樣的電導率比未預處理試樣的電導率高，其硬度和強度也較高，但伸長率較低。
The effect of pre-treatment（15% pre-deformation +100 ℃ pre-aging for 5 h）on creep age forming of aluminum alloy 2124 sheets, which can be enhanced by heat treatment, was investigated. The microstructures and properties of two sheets with different pre-treatments were analysed by means of SEM, TEM and measuring the electrical conductivity, Vickers hardness and tensile performance. The results show that the pre-treatment reduces the elongation of the initial stage of creep, but increases the steady-state creep rate; the coarse Fe and Si second phase particles are crushed to certain degree by the pre-treatment, and such coarse particles are further broken down by the subsequent creep stress. The morphology and distribution of the precipitated second phase particles are also improved by pre-treatment. The pre-treated sample depicts higher electrical conductivity, hardness and strength but smaller elongation rate than the non-pre-treated one.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博和微信和我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo?and?Weixin.