新聞資訊
拉伸與軋制預變形對2519A鋁合金組織與力學性能的影響
發布人：上海艾荔艾金屬材料有限公司www.jshcn.cn
更新時間：2015-12-21
通過硬度測試、拉伸測試、透射電鏡分析以及織構測試等手段，研究拉伸和冷軋兩種不同預變形方式對2519A鋁合金165 ℃時效后組織與力學性能的影響。
拉伸與軋制預變形對2519A鋁合金組織與力學性能的影響Effects of stretching and rolling pre-deformation on?microstructures and mechanical properties of 2519A aluminum alloy
?通過硬度測試、拉伸測試、透射電鏡分析以及織構測試等手段，研究拉伸和冷軋兩種不同預變形方式對2519A鋁合金165 ℃時效后組織與力學性能的影響。結果表明：適當的變形量均使θ′相尺寸細小、密度增加，而變形量過大使θ′相分布變得較不均勻，合金強度提高不大，而塑性降低；6%拉伸預變形和7%冷軋預變形使合金板材峰值時效抗拉強度、屈服強度和伸長率分別為472 MPa、404 MPa、15.6%和472 MPa、417 MPa、9.4%，二者的抗拉強度基本相同，但前者的屈服強度低、塑性高；兩種預變形方式下板材織構類型相同，取向密度無明顯差別；合金板材屈服強度和伸長率的差別由第二相θ′相的數量、尺寸和分布所確定。
The effects of stretching and rolling pre-deformation on the microstructures and mechanical properties of 2519A alloy plate aged at 165 ℃ were investigated by hardness test, tensile test, transmission electron microscopy(TEM) and texture measurement. The results show that for both of the pre-deformation methods, proper pre-deformation leads to the quantity increasing and refinement of θ′ phase. But the inordinate deformation leads to an inhomogeneous distribution of θ′ phase, which decreases the elongation. For the 6% pre-stretching elongation and 7% pre-cold cooling deformation, the tensile strength, yield strength and elongation are 472 MPa, 404 MPa, 15.6% and 472 MPa, 417 MPa, 9.4%, respectively. Both of their tensile strengths are equivalent, but the yield strength of the pre-stretched alloy plate is lower, while the elongation is higher. The texture components and orientation density of the pre-stretched and pre-rolled alloy plates are almost the same, therefore, the yield strength of the alloy plate is determined by the quantity, size and θ ′ phase distribution.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博和微信和我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo?and?Weixin.