新聞資訊
鋁合金2A12-O的動態充液拉深
發布人：上海艾荔艾金屬材料有限公司www.jshcn.cn
更新時間：2015-12-19
針對鋁合金板材成形性差的特點，提出液體內向流動動態充液拉深新技術。采用鋁合金2A12-O板材對成形過程進行了初步實驗驗證后，運用有限元方法探討不同的徑向壓力和不同的預脹路線對成形零件壁厚分布的影響。
鋁合金2A12-O的動態充液拉深Hydrodynamic deep drawing process of 2A12-O aluminum alloy
針對鋁合金板材成形性差的特點，提出液體內向流動動態充液拉深新技術。采用鋁合金2A12-O板材對成形過程進行了初步實驗驗證后，運用有限元方法探討不同的徑向壓力和不同的預脹路線對成形零件壁厚分布的影響。結果表明，采用該方法可以顯著提高鋁合金2A12-O的成形極限，成功拉深出拉深比達2.85的杯形件；徑向壓力顯著影響杯形件壁厚的分布，通常較大的徑向壓力下的壁厚也較大。
A new method, named hydrodynamic deep drawing with radially inward flowing liquid, was proposed, aiming at the poor formability of aluminium alloy sheet. After a preliminary experimental validation of the proposed method by using 2A12-O aluminum alloy, the effects of different radial pressures and different pre-bulging loading paths on the wall thickness distribution of the formed cups were investigated with the assistance of FEM. The results show that the foming limit of 2A12-O aluminum alloy is obviously improved by the method, and a cup with a drawing ratio of 2.85 is formed successfully. The radial pressure during the deep drawing process has a great influence on the wall thickness distribution of the formed cups. In general, the higher the radial pressure, the thicker the wall thickness.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博和微信和我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo?and?Weixin.