新聞資訊
7050-T7451鋁合金銑削加工表面材料特性與本構關系模型的建立
發布人：上海艾荔艾金屬材料有限公司www.jshcn.cn
更新時間：2015-12-03
為研究7050-T7451鋁合金材料銑削后表面應力應變特征，并建立表面材料本構關系模型，采用SSM-B4000TM型應力應變顯微探針測試系統對鋁合金7050-T7451材料表面進行自動球壓痕(ABI)實驗測試。
7050-T7451鋁合金銑削加工表面材料特性與本構關系模型的建立Milling surface properties of 7050-T7451aluminum alloy and establishment of constitutive model
為研究7050-T7451鋁合金材料銑削后表面應力應變特征，并建立表面材料本構關系模型，采用SSM-B4000TM型應力應變顯微探針測試系統對鋁合金7050-T7451材料表面進行自動球壓痕(ABI)實驗測試，獲得載荷-深度曲線，據此估算本構關系模型中應變硬化指數(n)與屈服強度(σy)等未知參數。進而基于有限元建模(FEM)進行壓痕過程的有限元仿真分析，研究本構關系模型中參數n與σy的變化對載荷-深度曲線的影響規律，獲得仿真載荷-深度曲線與實驗曲線誤差最小時的參數n與σy應滿足的函數關系，驗證了基于實驗本構關系模型參數的準確性。采用該材料本構關系模型仿真的載荷-深度曲線與實驗曲線相比，平均誤差為5.2 %。
In order to investigate the stress-strain properties of milling surface for 7050-T7451 aluminum alloy, and also to establish the constitutive model, automated ball indentation (ABI) test was carried out on the SSM-B4000TM?stress-strain microprobe system. The load-depth curve was obtained. Unknown parameters such as strain hardening exponent n and yield strength σy?were obtained based on this curve. Furthermore, indentation processes were simulated based on finite element method (FEM). Accordingly, the influence rules of the changes of parameters n and σy?on load-depth curve were studied. The functional relationship between parameters n and σy?was obtained when the error of load-depth curve between the simulation result and experimental value is the lowest. At last, the validity of parameters n and σy?in constitutive model obtained from ABI test was proved. Under this constitutive model, the average error between simulation load-depth curve and the test one is 5.2%.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博和微信和我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo?and?Weixin.