新聞資訊
擠壓時效態MB8鎂合金在鹽水中的腐蝕行為
發布人：上海艾荔艾金屬材料有限公司www.jshcn.cn
更新時間：2015-08-19
采用光學顯微鏡(OM)、掃描電鏡(SEM)和能譜分析(EDS)等手段研究擠壓時效態MB8鎂合金在鹽水浸泡條件下的腐蝕特征，并探討合金的腐蝕機理。
擠壓時效態MB8鎂合金在鹽水中的腐蝕行為Corrosion behavior of aged extrude MB8 magnesium alloy in
saline solution
采用光學顯微鏡(OM)、掃描電鏡(SEM)和能譜分析(EDS)等手段研究擠壓時效態MB8鎂合金在鹽水浸泡條件下的腐蝕特征，并探討合金的腐蝕機理。結果表明：合金以絲狀腐蝕和點蝕這兩種局部腐蝕為主要的腐蝕形式。合金經過一定時間的誘導期后發生絲狀腐蝕，腐蝕前端的絲頭處發生鎂基體的陽極溶解，已發生腐蝕的絲尾處作為活性陰極發生析氫反應；第二相粒子對絲狀腐蝕的擴展具有重要影響，橫截面上絲狀腐蝕隨著彌散分布的第二相粒子向四周擴展，而縱截面上腐蝕絲隨著第二相粒子的帶狀分布呈長條帶狀形貌特征；在絲狀腐蝕還未擴展到的區域由于第二相粒子與基體之間的腐蝕微電偶作用導致基體發生陽極溶解，從而產生點蝕。
The corrosion characteristics and corrosion mechanism of
aged extrude MB8 magnesium alloy immersed in saline solution were investigated
by optical microscopy (OM), scanning electron microscopy (SEM) and energy
dispersive X-ray spectrometry (EDS). The results show that filiform corrosion
and pitting corrosion are the main corrosion forms for MB8 alloy. After an
induction period, filiform corrosion occurs coupling with anodic Mg dissolution
at the leading edge of the corrosion front and hydrogen evolution on a
cathodically activated corroded region behind. The second phases show
significant effect on the propagation of filiform corrosion. The filiform
corrosion grows in all directions due to the dispersively distributed second
phases in the cross section, while the corrosion filament extends like bands due
to the second phases distributed in bands in the longitudinal section. In the
region without filiform corrosion, pitting occurs due to the galvanic effect of
Mg matrix coupled with second phase particles.
以上資料由上海艾荔艾金屬材料有限公司提供，歡迎新老客戶來電洽購。
本文來自上海艾荔艾金屬材料有限公司http://www.jshcn.cn，轉載請注明出處。